A lot of the outbound sequences I read are one good email followed by a string of apologies for it. “Just checking you saw my note.” “Circling back on this.”
The follow-ups deserve better. Instantly’s 2026 cold email benchmark, built from activity on its own platform between January 1 and December 18, 2025, attributes 58% of all replies to the first email in a sequence. The other 42% come from follow-ups. Its 3.43% average reply rate counts both: every reply, follow-ups included, divided by every email sent.
You can read that split two ways, and both readings are right. The 58% says the opener carries most of the outcome. The 42% says a firm that sends once and stops leaves a large share of the available replies unclaimed.
This piece is about the second reading. In my experience, follow-ups are the half of the sequence that gets planned last, if it gets planned at all.
I’ve written about the opener before, mostly on having your position ready before the trigger arrives. This one picks up where the opener stops.
The constraint is information, not cadence
A follow-up has one job. It has to give the buyer a reason to reply that the last message didn’t. “Just checking you saw my note” adds a send and nothing else.
Instantly’s own report says as much. Its advice on sequence length comes with a condition attached: past seven touches, returns diminish “unless each touch adds genuine new value.” Each follow-up, it says, needs “new value or angle,” never “just checking in.”
That condition is where the trouble starts. Scheduling four sends is a settings screen. Writing four messages that each say something new means knowing four separate things worth telling this particular buyer.
Have you ever set up a four-step sequence, filled in email one, and then sat looking at the empty box for email two?
It’s an oddly specific kind of blank page.
Here’s how most openers get written, and it’s a perfectly rational way to write one. A trigger lands, the window’s short, and you want your best shot in the first message. So in it goes: an observation about the prospect’s situation, a comparable placement, a nod to your market knowledge, and a request for a call. If anything’s going to get a reply, surely it’s that.
Then it goes unanswered, which is the normal fate of a cold email. Flip Instantly’s 3.43% around and roughly 97 of every 100 emails sent on its platform didn’t get a reply. The opener has already spent every reason to write again, so message two becomes “checking in” by default.
A trial lawyer’s opening statement is the better model. The opening tells the jury what the case is about. It doesn’t read every exhibit aloud, because the exhibits come in one at a time over the days that follow, and each one lands harder for arriving on its own.
Your sequence works the same way. The opener frames why you’re getting in touch. Each follow-up introduces one piece of evidence the opener held back.
Which gives you the method: write the whole sequence before the first message goes out. If you can’t write the third message, you don’t have a sequence yet.
I know how that sounds if you’ve read my piece on turning alerts into mandates within 48 hours. Nobody’s asking you to sit on a live trigger while you draft. Write the sequence as part of the preparation done before the trigger arrives, alongside the position you’ve already got ready, and it’s waiting for you when the alert lands.
And if you’d rather commission the whole sequence than write it in-house, that’s what Outbound Sequences is for.
A worked example
Everything in this sequence is invented (the firm, the prospect, the people, and every detail) to show the method, not to report a case. Four messages is a choice made for the example, not a recommendation. The right length depends on how many new things you actually have to say.
The situation. Say you run a mid-sized retained firm specializing in healthcare technology. You learn that a privately held clinical-data company of roughly 600 people has brought in an external CEO to succeed its founder. You’re writing to the company’s Chief People Officer. Your firm has placed finance and technology leaders in two comparable founder-to-professional-CEO transitions. The reason to write now is the transition itself: an outside CEO inheriting a founder’s team is a recognizable moment for leadership changes.
Message 1, the opener. It names the appointment, makes one specific observation about what that kind of transition tends to raise for the leadership team, and asks one easy question: whether the new CEO’s first-year priorities include any senior hires. Under 80 words. Your placements and your market data stay out of it entirely.
That restraint is the point. Each thing the opener holds back, including any offer to end the conversation, becomes the substance of a later message.
Message 2, the evidence. Sent several days later. It carries one anonymized placement from a comparable transition: where the client was, the role, what the search had to solve, and how the appointment worked out, stated with its limits (“one assignment, not a pattern”). It doesn’t repeat the opener’s observation, and it works on its own if the buyer never read message 1.
What makes it new: the opener claimed you understand this situation, and message 2 shows one instance of it. It’s the first exhibit.
The evidence carries obligations of its own. AESC’s Client Bill of Rights expects member firms to give clients “a candid assessment of their capabilities” that covers “an overall understanding of the marketplace,” and not to take assignments they’re unqualified for. I’d hold a follow-up built on placement evidence to the same standard, which is why one accurately described assignment holds up better than a wall of logos. It’s also the kind of record buyers are told to check. AESC’s guide lists track record as a selection factor and names “completion rate and repeat business” as indicators of “a strong commitment to clients.”
AESC also requires members to protect information clients and candidates entrust to them, and says that information isn’t shared beyond the assignment or used for the consultant’s own gain. A placement story in a business development email sits close to that line. So the example has to be anonymized to the point where neither the former client nor the person you placed can be identified, and I’d clear it with the former client before it goes anywhere. An internal sign-off isn’t enough.
Message 3, the market information. This one offers something the buyer doesn’t have and can’t easily put together. Here, that’s a short description of what your own recent mapping shows about the available population of CFOs with clinical-data experience at that company’s stage, and what that population expects to be paid. AESC’s guide to choosing a search firm puts both inside the search assignment itself: mapping the talent pool “across industries and geographies” and advising on “market standards” for compensation. The same guide counts a firm’s “ability to bring evolving market trends to the discussion” among the main advantages of hiring one with deep expertise, though it’s talking about shaping the role once a search is under way. Message 3 hands the buyer a small sample of that work before there’s an assignment.
What makes it new: messages 1 and 2 were about you and your read on this kind of transition. Message 3 is about the buyer’s own hiring problem. It’s useful to them whether or not they ever reply. It also goes to what buyers say they weigh. AESC’s own client research, reported in the same guide, found that clients worldwide consider industry and functional knowledge “a top factor when selecting an executive search advisor,” and the guide puts the consultant’s industry and functional knowledge first in its list of seven factors. It doesn’t give the research’s date or sample.
It’s the hardest message to write and the clearest test of whether you have a sequence at all. It also carries the heaviest verification burden. Any figure in it has to come from your own current data, labelled as yours, with its date and sample stated. My read of the AESC confidentiality line above is that it covers this message too. Mapping you did inside a client’s search belongs to that assignment, so build message 3 from research you ran for your own practice, aggregated so no client’s search shows through. If a market claim can’t be supported, leave it out rather than approximate it. An unsupported number is the quickest way to turn your best message into your last one.
Message 4, the close. A short final note. It says this is the last message on the subject, restates nothing, and leaves a specific, low-effort option. For example, an offer to send a two-page summary of the market mapping in case it’s useful when the new CEO reviews the team. It doesn’t ask for a meeting.
What makes it new: it changes the terms. Messages 1 to 3 each ask for a reply. Message 4 tells the buyer they won’t hear from you again on this subject and hands them something to keep.
It also gives you a clean stopping point. My view, and it’s a view rather than a finding, is that a clean stop matters more in executive search than in most cold outreach, because the same Chief People Officer is likely to be your prospect again at the next leadership change.
What the example shows
The four messages share a subject (the transition) and differ in content: an observation, an instance, a body of data, and an exit. None depends on the buyer having read the others, and none repeats an earlier claim. Two working rules fall out of that.
Plan the content before the copy, and let the content set the length. Decide which piece of information belongs to which message before you write any of them, and keep the later material out of the opener. An opener carrying the placement evidence and the market view has spent the whole sequence in one send.
The same exercise settles how long the sequence runs. If you’ve got two new things to say, you’ve got three messages, not five. Padding a sequence to hit a recommended count produces exactly the “checking in” message the benchmark warns against.
Make each message work alone. A buyer who sees only message 3 still needs to know who’s writing and what’s on offer. Inboxes aren’t read in order, and a follow-up that opens with “as I mentioned” assumes a reader who may not exist.
One finding in Instantly’s report pulls the other way. It says the best step 2 emails “feel like replies, not reminders,” and that a short nudge opening “Quick follow-up on my note below” beats formal follow-ups by about 30%. It doesn’t say which metric that 30% refers to, or how it was measured. I read it as a finding about tone, not content. Message 2 can sound like a quick reply and still carry the placement, and it still has to make sense to someone who never saw the note below.
What the 42% doesn’t prove
The 42% describes what happened across Instantly’s platform, which is a general cold-email population. It’s also a vendor’s own data: Instantly sells the software that sends those follow-ups. It isn’t a measurement of executive-search business development, and it’s platform observation rather than a controlled comparison. It doesn’t show that adding follow-ups, or adding these follow-ups, will lift replies for your firm, and I’m not claiming it does.
The method doesn’t need it to. It rests on a simpler point, one Instantly makes in its own advice: each follow-up needs “new value or angle.” That’s a point about content rather than a measured result, and it holds whether or not the 42% transfers to executive search.
The test before the first send
Writing the follow-ups first is the practical way to find out, before the opener goes, whether you’ve got enough to say. If messages 2 and 3 come easily, the opener’s ready. If they don’t, the gap isn’t in the copywriting. It’s in the material behind those messages (the placement evidence and the market data), and that’s what has to be built first, either in-house or as part of an outbound sequence engagement.
So write message 3 before you write message 1. If it won’t come, you’ve found the hole in the sequence before a buyer did.



Leave a Reply